What To Look For In A New Oil Boiler For Your Home

image of a boiler installation

Sadly, even a good thing must end. While your boiler is an essential piece of equipment in your home, it will not last forever. Eventually, your boiler’s performance will decline, and you will see changes in its reliability and efficiency. At this point, boiler repairs will not be the most cost-effective option, so a new oil boiler installation is your best bet. Use this opportunity to choose a system with modern features better suited to your family’s needs. Read more below about what you should consider when searching for a new boiler during your heating system upgrade.

Explore Our Heating System Services Call To Schedule A Free, In-Home Estimate

Factors You Need to Consider When Choosing a New Boiler

Replacing an oil boiler is not an easy task, so you need to give yourself time to review all the available options. Consider the physical layout of your home and the specifications required. If you are not knowledgeable of this information, you need to contact an HVAC technician to advise you. Ask them about the process, specifications, and other questions that will provide you with the answers you seek. A technician can guide you and assist you in choosing the most suitable option. Here are some factors you must consider before your oil boiler installation takes place.

1. Type of Oil Boiler

Peerless Boiler

Property owners can choose from two types of boilers: hot water and steam boilers. Although both operate similarly, you will see some distinct differences. Hot water boilers have higher heating temperatures and fewer accessories. However, steam boilers are more efficient and safer, which makes them more suitable for larger homes or factories. On the other hand, hot water boilers are ideal for small to average-sized homes. Either system may operate with natural gas or heating oil. Many households in Long Island opt for heating oil because it is available and cost-effective.

Call Today: (631) 667-3200

Related Article: What To Expect During Your Home HVAC Installation

2. Size of the Heating Oil Boiler

Many homeowners expect that larger boilers are more suitable than smaller ones, but this is not true. There is an ideal size for each home. If your heating system is too large, you will encounter “short-cycling,” which occurs when the house heats up too quickly, then your burner shuts off. This abrupt shutting off and on wears the system causing eventual breakdowns. Some property owners install replacement units, which are the same size as the original equipment. An HVAC professional is the best person to measure and calculate the size of equipment your home needs.


3. Oil Boiler Efficiency

efficiency rating depicting energy efficient oil-fired heater

The purchase price of a new boiler is only one consideration. We know that heating systems use most of the energy a household consumes. Therefore, you must find ways to decrease operating costs, such as acquiring a high-efficiency boiler to reduce fuel costs. Do not focus on the upfront costs of purchasing a new system because you will save money in the future. The AFUE measures your unit’s fuel-to-energy conversion throughout the periods you use the system. Higher ratings bring better results, so look for boilers with Energy Star labels for the most efficient models.

Learn More About Our Heating System Services Call To Schedule A Free Estimate

Related Article: What Is That Whistling Sound During An Oil Delivery?

4. Maintenance of an Oil-Fired Boiler

Your heating system requires care and attention to maintain consistent and long-lasting performance. Each type of boiler requires a specific maintenance regimen. You need to know about these service specifications for each model before you select one. Ensure that you understand and can manage the ownership obligations. Bear in mind that property owners cannot perform all maintenance tasks. Certified HVAC technicians must perform some servicing tasks. Arrange annual maintenance by a professional to help your system last longer.


5. Requirements for Boiler Venting

Ensure your boiler has proper ventilation to empty gases from burned fuel. Find a ventilation method that fits in with your home’s design. Chimney-vented boilers utilize vertical stack to push gasses out slowly. The lower-density fumes float up and out through the opening. Alternatively, power-vented boilers use fans to push gases out because the blower allows venting through a home’s side wall if it does not have a chimney. This only works if you have a large airy room. Direct-vented boilers are ideal for confined spaces since they do not depend on indoor air.

Related Article: Oil Tank Condensation: What To Be Aware Of

6. Your Climate & Your Oil Boiler Installation

house in winter that uses heating oil

The weather determines how much stress you place on the heating system. While you may need to use the boiler in some places for the cold season, you may need to use your boiler all year in other areas. Therefore, a homeowner must choose a boiler unit able to carry this load.

Call To Schedule A Free Consultation Explore Our Case Studies

7. Brand Name of the Oil Boiler

Every manufacturer develops unique and innovative techniques. Some manufacturers have stood out based on the performance of their products. For instance, people recognize some brands for their efficiency and reliability. Other brands may be responsive to customers for warranty repairs. Therefore, property owners must research the higher-rated brands or ask relatives and colleagues for recommendations on particular models. Count on HVAC technicians to advise based on their experience and knowledge.

Get Started - Call Hart Home Comfort Today



Choosing the ideal boiler for your house depends on your home’s layout and needs. Reduce the time and stress from researching options by seeking support from a highly recommended HVAC contractor. If your system utilizes heating oil, consider a replacement boiler that will not be expensive to replace. Your new system should have excellent energy-efficiency ratings, appropriate system capacity, and venting requirements. Of course, a solid brand name will increase your confidence that the new system is reliable.

Call Hart Home Comfort for All Your HVAC Requirements

hart-logoHart Home Comfort is the best HVAC solutions provider in Nassau County, Suffolk County, and Queens, New York. Customers are always happy to get a visit from our certified technicians, who are known for their professionalism and competence. They conduct exceptional repairs, installations, replacements, and tune-ups. Click the link to view our service area.

Come to us if you want competitive rates. You will never have to worry about excessive costs. We’ll make recommendations that are sensitive to your budget. Our services can also increase energy efficiency, further reducing your expenses. We will even give you a satisfaction guarantee. Call Hart Home Comfort today and schedule an appointment.

Call Now: (631) 667-3200 Read Our Reviews

For any questions about what Hart Home Comfort can do for you, give us a call today. Click here to contact us now or call us at (631) 667-3200 to find out more!